Sale!

Hardware & Jobsite Supplies Simpson Strong-Tie | Simpson Strong Tie Sd #9 X 2-1/2″ Connector Screw 2000 Ct. Sd9212Mb

Name: Hardware &amp; Jobsite Supplies Simpson Strong-Tie | Simpson Strong Tie Sd #9 X 2-1/2" Connector Screw 2000 Ct. Sd9212Mb
SKU: ZYCHWJ6854835-5010DOCT
Price: 97.00 USD
Availability: InStock

$97.00

Add to wishlist

SKU: ZYCHWJ6854835-5010DOCT Categories: Hardware & Jobsite Supplies, Screws Tag: Simpson Strong-Tie

Description
Reviews (0)

Simpson Strong-Tie
Strong-Drive Sd Connector Screw
Common Application: Simpson Strong-Tie Connectors
Features:
The Strong-Drive Sd Connector Screw Is Specifically Designed To Replace Nails In Certain Simpson Strong-Tie Connectors; And Is The Only Screw Approved For That Application. The Load-Rated Sd Screw Has Been Tested And Approved For Use In Many Popular Simpson Strong-Tie Products. In Certain Applications Screws Are Easier And More Convenient To Install Than Nails; And The Single-Fastener Load Values Achieved By The Sd Screw Exceed Those Of Typical 10D Common Or 16D Common Nails; Respectively. In Addition; The Galvanized Coating Makes The Sd Screw Ideal For Both Interior And Most Exterior Conditions.
Specifically Designed To Replace Nails In Certain Simpson Strong-Tie Connectors; And Is The Only Screw Approved For That Application. The #9 And #10 Sd Screws Replace 10D And 16D Nails Respectively.
Tested And Approved For Use In Many Of Our Best-Selling Connectors For Both Interior And Exterior Applications
Ideal For Use In Connector Applications Where More Control Is Desired Or Using A Hammer Is Inconvenient
1/4 Hex Head Reduces Cam-Out And Is Stamped With The Simpson Strong-Tie Inin Sign And The Fastener Size For Easy Identification After Installation
Shank Is Specifically Designed To Match The Fastener Holes In Simpson Strong-Tie Connectors
Patented Serrated Threads And Sharp Point Make Driving Easy
Optimized Heat Treating For Ductility And Strength
The Single-Fastener Load Capacity Of The Sd9 Exceeds The Capacity Of A 10D Common Nail; While The Single-Fastener Load Capacity Of The Sd10 Exceeds That Of The 16D Common Nail
Hex Driver Included
Mechanically-Galvanized Coating Meets Astm B695 Class 55; Is Recommended For Use With Certain Preservative-Treated Woods And Recognized As An Alternate To Hot-Dip Galvanized In Esr-3046; It Is Compliant With The 2006; 2009; And 2012 International Residential Code (2006 Section R319.3; 2009 Section R317.3.1).
Model No.: Sd9212Mb
Length (In.): 2 1/2
Screw Size/ Nail Gauge: 9
Drive: 1/4″ Hex Drive
Head Type: Hex Head
Point: Sharp Point
Material/ Coating: Mechanically-Galvanized Coating – Class 55
Pkg Size: 2000